Shenzhen Just Motion Control electromechanics co., ltd
0755-26509689
3, in order to ensure the safety of use, be sure to drive the ground protection terminal and equipment protection
to a good connection!
4.2 Installation and use environment
The installation and use environment has a direct impact on the normal operation and service life of the product,
so the following conditions must be met:
1. Working environment temperature: 0~55℃; Working environment humidity:1 0%~ 9 0%(no condensation).
2. Storage environment: -20℃~+85℃; storage environment humidity:90%or less (no condensation).
3. Vibration: 0.5G or less.
4. Prevent rain dripping or wet environment.
5. Avoid exposure to sunlight.
6. Prevent oil mist and salt erosion.
7. Protection against corrosive liquids, gases, etc.
8. Prevent the intrusion of dust, cotton wool and metal fines.
9. Keep away from radioactive materials and combustibles.
10. Space shall be reserved around the driver placement position in the cabinet to facilitate loading, unloading
and maintenance.
11. Pay attention to the air flow inside the cabinet. If necessary, install an external fan to enhance the air flow and
reduce the ambient temperature of the drive to facilitate heat dissipation; The long-term working temperature
is below 55℃.
12. Try to avoid the vibration source nearby, and install damping device such as vibration absorber or
anti-vibration rubber gasket.
13. If there is an electromagnetic interference source nearby, the power supply and control circuit of the driver
are susceptible to interference and cause misoperation. A noise filter can be added or various effective
anti-interference measures can be taken to ensure the normal operation of the driver (the noise filter will
increase the leakage current, and an isolation transformer needs to be installed at the input end of the driver
power supply).
37
