Shenzhen Just Motion Control electromechanics co., ltd

0755-26509689

d33.H

d34.H1

d35.S1

d36.C.PU

d37.F.PU

d3 8. P.

Er

d39.A du

Hardware model

(hardware information)

Hardware Version

Software Version

position command pulse

sum

Position feedback pulse

summation

Parameter number of

value exception

Advanced Functional

Exception Code

This parameter monitors the drive model (hardware

power information)

This parameter monitors the hardware version

number

This parameter monitors the software version

First 2 digits: FPGA version; Last 2 digits: ARM

version

This parameter monitors the sum of the position

command pulses (accumulated after power-up)

This parameter monitors the sum of the position

feedback pulses (accumulated after power-up)

This parameter can querythe abnormal parameter

number when alarm 1 07

This parameter can query the warning code when

performing advanced functional exceptions

instruction

unit

instruction

unit

8.4 auxiliary function

Display

Item

F01.JoG

F02.run

Functions

Operation

JOG

Commissioning

Force Enable

Run Speed Mode

1. Press theM keyon the operation panel to switch to the auxiliary

modeF**, operate theUp/Down key toF01.JoG, and press theENT key to

enter the Jog working mode. The default Jog speed is 30rpm (P04-01 sets

the JOG running speed).

2. Press the Up key, and the motor will rotate forward at the speed of

30r/min; When the Down key is pressed, the motor reverses at a speed of

30r/min.

4. Press theM key to exit Jog mode.

1. Press theM keyof the operation panel to switch to the auxiliary

modeF**, operate theUp/Down key toF02.run, and press theENT key to

enter the operation mode.

149