Shenzhen Just Motion Control electromechanics co., ltd

0755-26509689

Fig.19 Schematic diagram of 21 tracks of return to zero mode

Return to zero mode22

WhenP03-61 = 22, select return to zero mode 22:

Take the CW direction end of HS limit as zero point.

The starting position is at theCCW direction side of HS limit: the motor first moves in CCW

direction at the speed of P03-65 returning to the mechanical origin. When the CCW limit is activated,

the motor will run in CW direction in reverse. After the HS limit is activated, the motor will

decelerate and run at low speed according to the setting of P03-66. After leaving the HS limit,

the motor will run in CCW direction in reverse. When the HS limit is activated, the motor will

stop. This point is the zero return origin.

The starting position is on theHS limit: the motor runs at a low speed in the CW direction

according to P03-66. After leaving the HS limit, it runs in the CCW direction in the reverse direction.

When the HS limit is activated, it stops. This point is the zero return origin;

The starting position is atthe CW direction side of HS limit: the motor first moves in CCW

direction at the speed of P03-65 returning to the mechanical origin, and stops when HS limit is

activated, which is the zero return origin;

201