Shenzhen Just Motion Control electromechanics co., ltd
0755-26509689
3.2. 4 JAND-DB44 Servo DriverCN1 Control Port
Connection Description
The digital inputsDI (DI1-DI8) can be connected using switch, relay, open collector transistor circuits. Power can
be supplied from either the drive's internal power supply or an external power supply. (See 8.2.7 P06-xx I/O
parameter description for the function setting of input I/O port)
Use external power input
Use internal power input
Digital OutputsDO(DO1-DO5) Outputs can be connected to relays, optocouplers, etc. You can use the power
supply provided inside the drive or you can use an external power supply. When using the internal power supply,
drive the internal 24V power supply can only provide 150mA current, when the load is greater than 150mA, please
be sure to use the external power supply, the supply voltage range is5-24V. (See 8.2.7 P06-xx I/O parameter
description for the function setting of output I/O port)
29
