Shenzhen Just Motion Control electromechanics co., ltd

0755-26509689

Fig.25 Schematic Diagram of Track 27 of Return to Zero Mode

Return to zero mode28

WhenP03-61 = 28, select return to zero mode 28:

Take the CW direction end of HS limit as zero point.

The starting position is at theCCW direction side of HS limit: the motor firstly moves in

CCW direction at the speed of P03-65 returning to the mechanical origin; after the CCW direction

limit is activated, the motor moves in CW direction in reverse direction; after the HS limit is

activated, the motor decelerates to move in CW direction; after leaving the HS limit, the motor

moves in CCW direction in reverse direction according to P03-66 to set the low speed; when the

HS limit is activated again, the motor stops; this point is the zero return origin;

Starting position is onHS limit: run in CW direction at low speed, run in CCW direction in

reverse direction after leaving HS limit according to P03-66 to set low speed, stop when HS limit

is activated again, this point is the zero return origin;

The starting position is atthe CW direction side of HS limit: the motor first moves in CCW

direction at the speed of P03-65 returning to the mechanical origin, and when the CW limit is

activated, it runs in CCW direction in reverse direction, and stops when the HS limit is activated.

This point is the zero return origin;

207