Shenzhen Just Motion Control electromechanics co., ltd
0755-26509689
4. Please confirm that the driver shell and motor are grounded. Poor grounding may cause electric
shock.
Note: 1. Please do not tie the motor power line and signal line together or pass through the same pipe to
prevent interference with the signal.
2, signal line, encoder feedback extension line, please use multi-stranded shielded wire, strengthen
anti-interference ability.
3. After the drive is powered off, there is still high voltage inside. Please do not touch the power
terminal within 5 minutes, and confirm that the discharge indicator is off before operating.
4. Before power-on, please confirm whether the wiring is connected correctly.
1.3 Precautions for operation and operation
Danger: 1. Before the equipment is installed, please run it with no load to avoid accidents.
2. Do not allow untrained personnel to operate to prevent equipment damage and personal injury
caused by misoperation.
3. During normal operation, please do not touch the radiator of the drive and its interior with your
hands to prevent high temperature burns or electric shock.
Note: 1, please adjust the driver parameters, and then long-term test, to prevent the use of poor drivers and
equipment.
2, please confirm the equipment start, emergency stop, close and other switches are effective and then
run the equipment.
3. Please do not switch the power supply frequently.
1.4 Precautions for maintenance and inspection
1. During operation, it is forbidden to touch the inside of the driver and motor to prevent electric shock.
10
