Shenzhen Just Motion Control electromechanics co., ltd

0755-26509689

P0 3-66

P0 3-67

P0 3-68

P0 3-69

P06-11.01

P06-13.01

P06-14.01

P06-12.01

P06-15.01

P06-21.01

deceleration point signal.

The motor is always running at high speed P03-65 when electrically

zeroed.

Speed when searching for

home switch_low speed

Setting range: 0-1000, default 10

Set the low-speed speed value when searching for the origin when the

origin returns to zero.

The speed setting should be low enough to prevent mechanical shock

during shutdown.

Search for origin switch

acceleration/deceleration

time

Set the time when the motor changes from 0 to 1000rpm at the time

of home reset. Unit:MS

Maximum time limit for

searching origin

Limit the total time of home reset, and alarm AL.551(home reset

timeout fault) will occur if the time is exceeded.

Mechanical origin offset

Setting range: -1073741823-1073741823, default:0 unit: instruction

unit

Set mechanical origin offset after origin reset

DI1 Input Port Function DI1 set to 1, servo ON

Selection

DI3 Input Port Function DI3 set to 3, positive overtravel signal input

Selection

DI4 Input Port Function DI4 set to 4, reverse overtravel signal input

Selection

DI2 Input Port Function DI2 set to 15, home switch signal

Selection

DI5 Input Port Function DI5 set to 16, start signal of home reset

Selection

DI6 Input Port Function DO1 is set to 0D, and the signal of home reset completion

Selection

183