Zero offset: the position of the actual machine zero relative to the
return zero switch. If the position of the return zero switch is not the zero
position of the machine tool, this parameter is required to set the zero position
of the machine tool.
Machine docking position: the coordinate position where the current
axis needs to dock after zero.
11.4Machine tool parameters
Set the machine tool parameters, including the height controller configuration,
laser configuration, gas configuration, speed planning configuration, network
configuration, user login permission, and coordinate system configuration.
Figure 11.4 Machine Tool Parameters
11 . 4.1 Elevator configuration
To communicate and connect with the laser height controller, these device
parameters must be set in the THC configuration. In the regulator configuration, the
communication parameters of the laser regulator can be set, as shown in Figure 11.5.
110
    "