After entering BIOS, the system can be backed up by [F4]. The system backup only
backs up the operating system, not backup parameters, IO port configuration, coordinate
configuration and other information.
15.3, and the system reduction
After entering BIOS, restore the previously backed up system according to [F5].
The restored system restored here does not affect the users parameters, IO port
configuration, coordinate system configuration, etc., so it is recommended to use
the restore system function here.
15.4, start the system
After entering the BIOS, press [F6] to start the system. After the system upgrade,
there is no need to power off, you can directly press [F6] to start the system, the
system will jump out of bios and enter the main cutting interface.
15.5 A BIOS upgrade
After entering the BIOS, press [F8] to upgrade the system biOS. In general, users
do not need to upgrade to bios. This product may later with hardware upgrades to support
more features, when a bios upgrade may be required. Copy the bios program to the root
directory of the U disk, insert the U disk into the system, press [F2] - -> [F8], and
upgrade the bios according to the prompts.
Chapter 16: Installation and Commissioning
16.1 Setting of transverse / longitudinal pulse number
Setting of the transverse / longitudinal pulse number
136
    "