成都兴多维科技有限公司
Chengdu multidimensional robotization technology company
the X and Y axis coordinate setting of the tool setting tool is
completed. Manually drop the Z axis, move to the appropriate
position, click [Load current Z coordinate]
, Set the Z
axis setting position. When changing the tool, when it arrives in
place, it will first drop to the Z-axis coordinate at a faster speed,
and then touch the tool setting tool at a slow speed. Therefore, the
position should be raised appropriately, leaving a margin that is not
too small, otherwise the tool setting device may be damaged.
Set the magazine capacity according to the machine design.
Setting parameters 30001：Tool magazine capacity, The value is the
number of supported tools。
View the tool magazine design position, the tool holder is placed
parallel to the X axis or parallel to the Y axis. Change parameter：
30004 Straight row tool magazine installation type. Select the
corresponding type to complete the magazine type setting。
According to the type of straight-row tool magazine, fill in the
parameter tool change front point. If the straight-row tool magazine
is parallel to the X-axis, fill in the parameters. 30007 Tool change
Y axis front point；If the straight row magazine is parallel to the Y
axis, fill in the parameters 30006 Tool change X-axis front point。
The parameters to be filled in are the front point machine
coordinates. Please ensure that the tool holder will not touch the
tool holder and damage the tool magazine.
Now set the magazine position, manually move the machine, place
the holder on the holder, and make sure the position is correct. The
selected tool number is the number of the current magazine clamp.
Click [Set as current tool number] to complete the tool number
setting, and click [Load current X machine coordinate]
33
兴于思 维至精
