成都兴多维科技有限公司

Chengdu multidimensional robotization technology company

6.3.３ Camera offset and cross test

On the right side of the view are the [Load Current Position] and

[Back to Recognition Start] buttons, click [Load Current Coordinate],

the software sets the position to identify the starting point of the

Mark point; and click [Back to Recognition Point], Will return to

this position. When the machine is parked above this point, you can

view the coordinates of the recognition starting point. This point

does not require user setting under normal circumstances. When the

Mark point is recognized for the first time, the software

automatically sets the position of the first Mark point as the

starting point of the recognition point.

The user can set the camera offset in the [Camera Offset Test]

column. Both the spindle and vibrating knife camera offset settings

can be measured using a cross test. The cross test is now briefly

explained. Mainly divided into the following steps:

1. Prepare a piece of material and fix it. Move the knife to the

surface of the material, that is, move to the target position.

Click “Z Zero” to ensure that the surface can be traced.。

2. Click [Cross Test] and the machine starts to move. Will draw a

cross on the material.

3. Switch the machine control interface to the manual interface

to move the camera position. Align the center of the view with

the center of the cross and click [Calculate Offset]. The

software will calculate and set the camera offset. This step

requires entering the vendor password, which is the same as

the installation password.

兴于思 维至精

112