成都兴多维科技有限公司

Chengdu multidimensional robotization technology company

60007：Linear axis manual acceleration; unit mmm/s^2. The

acceleration is set according to the motor parameters and the

mechanical structure. The maximum speed is provided by the machine

tool builder. To ensure normal use, please set it less than this

value.

60101：X-axis manual low speed; unit mm/min. Low speed and high

speed motion can be selected for manual control. Changing this

parameter will change the speed of movement in low speed mode. The Y

axis and Z axis settings are the same.

60102：X-axis manual high speed; unit mm/min. Low speed and high

speed motion can be selected for manual control. Change this

parameter award to change the speed of movement in high-speed motion

mode. The Y axis and Z axis settings are the same.

7.3 Processing parameters

This column lists the parameters in the process for users to view

and modify, including processing speed settings, effect settings,

spindle vacuum pump settings, etc.

50001：Processing take-off speed; unit mm / min. That is, the

initial speed at the start of machining. Similar to the manual take-

off speed, the speed should not be set too large, otherwise the motor

will block and affect normal use.

50002：Dry running speed; unit mm/min. During machining, when

machining a workpiece, moving the Z axis to the next position is

called empty operation. This parameter can be modified after the

兴于思 维至精

136