成都兴多维科技有限公司

Chengdu multidimensional robotization technology company

change is completed, the axis signal wiring on the board also needs

to be modified to make the system operate normally. The Y axis and Z

axis settings are the same.

11002：Whether it must return to zero before processing; 1 is

yes, 0 is no. The system defaults to zero to ensure normal use, and

the user can modify the tool's own requirements.

11003：Motor type; 1 is stepping and 2 is servo. Set according to

the motor used by the machine.

11005：Whether the connection is automatically zeroed; whether

the automatic zero return option is prompted after the computer and

the control board are successfully connected. 1 is yes, 0 is no.

11101：X-axis origin; the mechanical coordinate of the trigger

point of the X-axis mechanical zero return limit signal, in mm. This

parameter is set according to the machine limit switch position and

is provided by the manufacturer. The settings for the Y axis and the

Z axis are the same.

11201：Initial orientation of the X axis; 1 positive, -1

negative. Set according to the position of the machine limit switch.

If it is installed on the stroke minimum side, select the negative

direction; if it is installed on the stroke maximum side, select the

forward direction. The Y axis and Z axis settings are the same.

11301：X coarse positioning speed; unit mm / min. In the process

of zero return, the machine first triggers the limit signal at a

faster speed, which is the coarse positioning speed. The speed is not

too fast, and the speed is too fast, which will cause the machine to

pass through during the zero return process. The settings for the Y

axis and the Z axis are the same.

兴于思 维至精

134