成都兴多维科技有限公司

Chengdu multidimensional robotization technology company

11401：X fine positioning speed; unit mm / min. During the zero

return process, after the coarse positioning is completed, it will

enter the fine positioning phase. Fine positioning will touch the

limit switch at a slower speed, which is the fine positioning speed,

which should also slow down as much as possible. The settings for the

Y axis and the Z axis are the same.

11501：X retraction distance; unit mm. During the zero return

process, after touching the limit signal, it will move backwards by a

small distance. This distance is called the retreat distance. The

retraction distance is not easy to set too large. If the setting is

too large, the return to zero time will be greatly extended, which

will affect the efficiency of use. The settings for the Y axis and

the Z axis are the same.

12001：X-axis speed limit; the maximum speed allowed for X-axis

motion, which will not be exceeded at any time. Y axis, Z axis are

the same

7.2 Manual parameter

This column can view and modify the parameters of the manual

moving machine, including the setting of take-off speed, manual high

speed and manual low speed.

60005：Linear axis manual take-off speed; unit mm/min. The speed

is the starting speed when the machine is manually moved. The speed

is not too large. If it is too large, the machine will shake greatly

at the moment of starting. If the setting speed is too high, the

motor will be blocked at the start.

135

兴于思 维至精