成都兴多维科技有限公司

Chengdu multidimensional robotization technology company

Change this parameter to choose to use file processing speed or use

software processing speed.

50101：Whether to use the file spindle speed; when machining with

a G code file, the file contains the spindle speed information.

Changing this parameter allows you to choose to use the file spindle

speed or use the software spindle speed.

50102：Whether the spindle starts automatically when machining

starts; changing this parameter can select whether the spindle is

automatically turned on when machining starts.

50103：Whether the vacuum pump is automatically turned on at the

beginning of processing; if this parameter is changed, it is possible

to select whether the vacuum pump is automatically turned on at the

beginning of processing.

50110：The processing end parking mode; the software provides

three parking modes: current position, specified machine coordinates,

and end position offset. 1. Current position: After the machining is

finished, the spindle will stop at the end position, and after the Z

axis is pulled up to the safe height, no movement will be performed.

2. Specify the machine coordinates: After the machining is finished,

pull up the Z axis and move the spindle to the specified machine

coordinate. 3. End position offset: After the machining is finished,

pull up the Z axis, and then move the spindle to the position where

the specified XY coordinates are offset from the end point.

50111：Parking position X-axis coordinates. This parameter is

used to specify the X coordinate of the parking position. When the

parking mode parameter is selected as the current position, the

parameter is useless; when the parking mode parameter is selected as

the specified machine coordinate, the parameter represents the X-axis

139

兴于思 维至精