成都兴多维科技有限公司

Chengdu multidimensional robotization technology company

setting tool, the Z axis coordinate of the workpiece surface is

automatically calculated and set as the workpiece origin coordinate,

and the Z axis is pulled up to complete the tool setting.

After the user finishes measuring the surface of the workpiece,

he needs to click [Point once to set the knife] and record the Z-axis

coordinates to facilitate subsequent tool change. Click [First Time

Tooling] to start the tool setting. The tool moves down to touch the

tool setting device, and the software records the current Z axis

coordinate.

In the process of machining, when the tool needs to be changed,

the user replaces the tool and clicks [Tool setting after tool

change]. After the tool is completed, the software resets the Z

coordinate of the workpiece origin, and the user can continue

processing.

Figure 6.5-2

6.5.3.3 Two points and three points

The user automatically calculates the square blank center through

the "two points in the middle" function. Process is as follows:

兴于思 维至精

122