成都兴多维科技有限公司

Chengdu multidimensional robotization technology company

50013：Arc speed limit; unit mm/min. The speed is the machining

speed of the arc with a radius of 5mm. The arc of other radius and

the arc of 5mm are used as the reference to adjust the speed of the

limit. The smaller the arc, the slower the speed, the faster the arc

is.

50014：Short line segment reference length; unit mm. When the

length of the small line segment is less than the value of this

parameter, it will be treated as a small line segment. When machining

the machine, the parameters of the small line segment will be used

for machining.

50015：Short-term acceleration; unit mm/min. When processing

small line segments, processing with this value as acceleration.

50016：Arc interpolation control accuracy; unit mm. Accuracy

selection when performing arc machining, the smaller the value, the

higher the arc accuracy.

50017：Z-axis safety height; unit mm. After the machining is

completed, the Z axis will be pulled up, and the height of the pull

will be the safe height.

50018：Z-axis falling speed selection; CNCRouter will provide

three kinds of falling knives: no processing; only Z-axis is

effective downward; it contains Z-axis lower component. 1. No

processing: no limitation on the falling speed; 2. Only the Z axis is

effective downwards only: the speed limit is only performed when the

Z axis is lowered alone; 3. The Z axis is the lower component: in

motion, if Z The shaft will move downwards and speed limit will be

applied.

50100：Whether to use the file processing speed; when processing

with a G code file, the file contains processing speed information.

兴于思 维至精

138