成都兴多维科技有限公司

Chengdu multidimensional robotization technology company

Spindle and Camera Offset Setup In addition to using the cross

test method, the software provides an automatic measurement method.

The user needs to have a black plate with a very thin white coating

on the surface to ensure that the milling position changes from white

to black. Specific steps are as follows:

1. Fix the spray white blackboard on the table top, and tool the

tool to the surface of the material, click [Z Clear]

, [X, Y

clear]

Complete the workpiece origin setting. Use manual

control to raise the Z axis to a safe height.

2. Switch the interface to the [Blinding] interface under the

[Program] page, set the circular milling bottom, set the [Working

Diameter] to 6, [Tool Diameter] to the actual tool diameter; [Tool

Distance] is less than the tool diameter. Click [Generate Load], the

software will automatically call the 6mm round milling file.

3. Click [Start], the machine will start processing, and a 6mm

circle will be milled on the whiteboard, the circle is black, and the

surrounding is white.

4. Switch interface to [Vision], click [Open Camera]

Open the camera, manually move the machine to align the

camera to the circle, make sure that the circle just milled out can

be observed in the display interface, click [Offset Measurement]

, The test machine starts moving and

automatically places the circle at the center of the image. When the

green cross completely coincides with the center of the circle in the

display window, the offset is automatically set.

113

兴于思 维至精