成都兴多维科技有限公司

Chengdu multidimensional robotization technology company

The user will need to measure the length of the tool according to

his own needs, and then click [OK]; the machine will start measuring

the length of the selected tool.

[tool magazine location]：

Here, the tool number of the current clamping knife can be

changed. When an extreme situation occurs, such as a power

interruption in the tool changing process, the spindle actually

clamps the tool number and does not match the current tool number of

the software. The user needs to manually set the current tool number

as follows: 1. Open the tool number drop-down list and select the

actual tool number on the current spindle; 2. Click [Set as current

tool number]; if the current spindle is not clamped, it will be zero.

No., click [Set current tool number to 0] to complete the current

tool number correction.

Note: Please ensure that the tool number recognized by the

software matches the actual tool number before using the machine,

otherwise the tool magazine will be damaged!

Before using the machine tool, it is necessary to set the

position of each tool holder of the tool magazine to ensure the safe

and correct completion of the tool change. Please refer to the

machine commissioning chapter for detailed commissioning procedures.

Here, the user can view and modify the location of the magazine,

and the user clicks on the number to modify it; or click [Load

Current Machine Coordinates] to set the machine coordinate of the

current spindle position to the machine coordinate of the magazine

location corresponding to the tool number.

Note: Do not change the location of the magazine at will,

otherwise the tool magazine will be damaged!

兴于思 维至精

126