成都兴多维科技有限公司

Chengdu multidimensional robotization technology company

Chapter Seven Parameter and Equipment Debugging

The user can view and modify all parameters in the parameter

interface, including axis parameters, manual parameters, machining

parameters, file parameters, tool parameters, spindle parameters, CCD

parameters. Some parameters are vendor parameters. You need to enter

the manufacturer password to view and modify this type of password.

The user can view and modify all parameters in the parameter

interface, including axis parameters, manual parameters, machining

parameters, file parameters, tool parameters, spindle parameters, CCD

parameters. Some parameters are vendor parameters. You need to enter

the manufacturer password to view and modify this type of password.

7.1 Axis parameter

In this column, set the three axis parameters of X, Y and Z,

including the setting of parameters such as speed, direction and

pulse equivalent.

10001：X-axis direction; used to control the direction of machine

tool movement, 1 is positive and -1 is reverse. When the actual

direction of motion is found to be opposite to the command issued,

the axis motion reversal can be done by changing this parameter. The

Y axis and Z axis settings are the same. For the direction of the

coordinate system, please refer to the 3.1 coordinate system.

10101：X pulse equivalent; displacement produced by each control

pulse, in mm/P. This parameter is provided by the manufacturer. The

wrong singular number will cause the machine tool to move less than

the specified position, and generally does not need to be modified.

The Y axis and Z axis settings are the same.

兴于思 维至精

132