成都兴多维科技有限公司

Chengdu multidimensional robotization technology company

In re-machining, the machining speed can be adjusted in real time

by sliding the slider next to the feedrate override. Clicking on the

rear digital display block can modify the default machining speed.

Adjusting the GOO magnification slider can adjust the speed of

the machine's dry running; the spindle can also control the speed in

real time through the slider.

This interface can manually turn the spindle and vacuum pump on

or off. Click [Spindle] to switch the spindle status; click [Vacuum

Pump] to switch the vacuum pump status. Green is in standby mode and

red is in working state.

When the file is loaded, click [Start] and the machine will start

processing. During the machining process, click [Pause], the

machining will be paused, click [Breakpoint Continue], and the

machining will continue from the stop. Click [Stop], the software

will stop the current processing.

After the error occurs, the software will automatically report an

error and the status bar will turn red. After the user finds the

problem and cuts it, click [Reset] to release the alarm status of the

software.

The user can manually control the machine to move in all

directions. Click the button, the phase axis will move in the

corresponding direction. Click the center [H/L] button to switch the

manual motion mode, H is the height motion, and L is the low speed

motion mode. User can adjust manual parameters [manual high speed]

and [manual low speed] custom speed.

The user next to the machine control bar can click on the sport

mode for the user to select the mode: continuous, handwheel, motion

兴于思 维至精

130