成都兴多维科技有限公司

Chengdu multidimensional robotization technology company

file; select the file and click [Delete], the target file will be

deleted, please be careful; if a new file is added to the folder,

click [Refresh] to refresh the file in the folder.

6.4.5 Milling bottom

The user of the milling bottom interface can perform cutting and

milling operations, and can perform square machining and circular

machining. Users can select according to their needs.。

When using the cutting function, the user can select the outer

frame cut or the inner frame cut. For square cutting, change the

length and width of the rectangle by clicking the number box next to

the height and width; the lower X, Y starting coordinates are offset

from the workpiece origin; the tool diameter is the tool offset that

the user needs to set. Each feed is the depth of the machining once;

the engraving depth is the machining depth after machining. For

example, if the feed amount is 1 and the engraving depth is 5, the

workpiece is processed 5 times, and the machining depth is 1 each

time.

When milling the bottom, you can set the tool nose distance,

click the rear number box to change, the number of settings should be

smaller than the tool diameter; switch the horizontal milling bottom

and the vertical milling bottom by clicking above.

After the parameters are set, click [Load File] to load the file.

After the loading is completed, you can simulate in the 3D interface.

兴于思 维至精

118