成都兴多维科技有限公司

Chengdu multidimensional robotization technology company

10201：The lower limit of the X-axis stroke; the minimum value of

the X-axis coordinate allowed by the X-axis, in mm. This parameter is

set according to the size of the machine. When the X-axis coordinate

is close to this value, the software will stop sending commands to

the motion board, so this function is the software limit. The user

can ensure that the machine movement does not go over during use, and

protect the safety of personnel and machines. The Y axis and Z axis

settings are the same.

10301：The lower limit of the X-axis stroke; the minimum value of

the X-axis coordinate allowed by the X-axis, in mm. This parameter is

set according to the size of the machine. When the X-axis coordinate

is close to this value, the software will stop sending commands to

the motion board, so this function is the software limit. The user

can ensure that the machine movement does not go over during use, and

protect the safety of personnel and machines. The Y axis and Z axis

settings are the same.

10401：The X soft limit is enabled; the user can choose whether

to use the set X-axis travel minimum and maximum values. 1 enable,

use settings; 0 disable, do not use settings. When the machine is

being debugged, the function can be disabled. After the debugging is

completed, please keep the limit function enabled to ensure safety.

The Y axis and Z axis settings are the same.

10501：X-axis type; select according to the axis type. 1 is a

linear axis and 2 is a rotary axis. Choose according to the actual

type. The Y axis and Z axis settings are the same.

10601：X-axis address; the same as the IO parameters, the

CNCRouter system supports user-defined editing of the axis signal

address to make the user's wiring and wiring more flexible. After the

133

兴于思 维至精