Specialized Concentrated Focused
Point” will be prompted as Fig. 4-7. Press [ESC] to cancel this operation. You need to adjust the
following related parameters sequentially: port polarity (see Chapter 5.3), pulse equivalent (see
Chapter 5.1.2), axis output direction (see Chapter 5.1.1) and machine stroke (see Chapter 5.2) before
homing all axes.
Booting the system...
Fig. 4-6 System start-up interface
Back to REF.
Point?
OK
ESC
Fig. 4-7 Prompt to home all the axes after system started
「22」Functions & Operation Methods of Panel Keys
    "