Friendess CypOne Laser Cutting Control Software
84
Parameter
Description
X,Y traverse speed
The maximum travel speed.
Traverse acceleration
The maximum travel acceleration.
Cut acceleration
Maximum cutting acceleration, which also decides acceleration
in corner cutting. You have to observe the torque curve in
servo tool to adjust this parameter.
LFP(Low-pass filter)
Filter the noise to suppress machine vibration. Lower value
means stronger effect but it also lengthen the acceleration
time.
Curve precision
The maximum curve precision of cutting control. The lower
the value is, more obvious in speed limit at curve cutting.
Corner precision
The precision of corner precision in NURBS curve fitting. The
lower the value is, corner path will be sharper and speed
reduction more obvious.
6.3.2 Cutting Acceleration
Jog motor axis in high speed like 500mm/s.
Monitor the torque curve in servo tool when jog the axis, increase the work
acceleration if peak torque under 80% or reduce cut acceleration if peak torque larger
than 80%.
Adjust the acceleration until peak torque reaches to 80%. The acceleration lead
screw structure can bear is usually no more than 0.5G. And no more than 2G for rack
gear structure.
6.3.3 Traverse Acceleration
You can put this value calculated by Servo Tools. Or larger than cut acceleration
