Friendess CypOne Laser Cutting Control Software
55
In above image, horizontal axis is cut speed, vertical axis is laser power/pulse
frequency, and the unit is percentage %. You can click on curve to add nodes or copy
the power-speed scale curve to pulse frequency- speed scale. When cut speed reaches
to one point in horizontal axis of scale curve, laser power and pulse frequency will be
regulated in real time coincidence to the vertical axis of scale curve. Notice: Pulse
frequency curve must works with power curve, means you have to enable both scale
curve.
For example, laser power 500W, preset cut speed 100mm/s, peak power 90%, cut
power (duty cycle) 80%, when the real cut speed lower to 60% of target cut speed,
CypOne will regulate laser to:
500W X 90% X 80% X 60.00% = 216.0W
The power will not be lower than 10% of the laser power, for example 500W
laser will not lower than 500*10%=50W.
If not select
, the cut power will remain same in
cutting process. In the above example, the power in the cutting process remains 500
W X 90% X 80% = 360W.
