Friendess CypOne Laser Cutting Control Software
53
defines laser fire times in one second, higher frequency
indicates more continuous laser wave.
Focus position
The relative position between laser focus to nozzle tip.
Laser on delay
The laser fires duration before start cutting to burn
through a small hole on material.
Step time
The time spent that lower from pierce height to cut
height.
Laser off delay
The delay to turn laser off to make sure cutting totally
finished.
Extra blow
The extra gas blow after pierce finished and laser turns
off to cool down the material.
③ Other parameters
Not cut
The parts drawing of this layer doesn't cut.
Not follow
Laser head holding in fixed height in cutting, now to
follow a constant distance with plate surface.
Gas on
Gas is open in the whole machining process.
Reduce lift
This function has to work with another parameter 'Unlift
when travel shorter than' in global parameter. When finish a
toolpath segment, if the travel distance to next start point
shorter than this value, laser head doesn't lift and move
directly to next start point.
Pre-pierce
Finish all pierces at start point then start cutting. There is
'auto group pre-pierce' option in global parameter dialog box.
Note: this option cannot work with defilm together
Defilm
Execute defilm cutting along toolpath first, then start
cutting. Enable this function will open a parameter window
