Error
code
Module
Type
Brief Description
Error Description
Recommended measures
03008 Warning
Warning Type
还原出厂设置失败，数据不正确
Factory reset failed, data incorrect
可能1.出厂设置参数不正确或被破坏，导致无
法还原出厂设置
Possible 1. The factory settings are incorrect or
damaged, making it impossible to restore the
factory settings
1.请重新导入固件配置和参数并保存出厂设置。
Please re-import the firmware configuration and parameters and save the factory
settings.
解析波形数据失败
03009 Warning Warning Type Failed to parse waveform data
可能1.主板和喷车板连接不正常
可能2.固件配置不正确或被破坏
可能3.固件配置与喷车板逻辑不匹配
可能4.波形文件异常或被破坏
1.请检查喷车板是否连接正常。
2.请导入正确的固件配置。
3.请从版本Information查看版本是否匹配。
Possible 1. The connection between the mainboard
and the trolley board is not normal.
Possible 2. The firmware configuration is incorrect
or damaged.
Possible 3. The firmware configuration does not
match the trolley board logic. Possible 4. The
4.请导入正确的波形文件。
1. Please check whether the trolley board is connected properly.
2. Please import the correct firmware configuration.
3. Please check whether the version matches from the version information.
4. Please import the correct waveform file.
waveform file is abnormal or damaged.
03010 Warning
Warning Type
未创建有效的波形类型
No valid waveform type created
可能1.系统参数波形数据丢失或被破坏
Possible 1. System parameter waveform data is lost
or damaged
1.重新导入正确的固件配置文件和固件参数文件。
2.导入正确的波形文件。
1. Re-import the correct firmware configuration file and firmware parameter file.
2. Import the correct waveform file.
无波形数据
03011 Warning Warning Type No waveform data
解析波形数据失败
03012 Warning Warning Type Failed to parse waveform data
可能1.系统参数波形数据丢失或被破坏
Possible 1. System parameter waveform data is lost
1.重新导入正确的固件配置文件和固件参数文件。
2.导入正确的波形文件。
or damaged
1. Re-import the correct firmware configuration file and firmware parameter file.
2. Import the correct waveform file.
可能1.系统参数波形数据丢失或被破坏
可能2.系统波形数据与当前喷车板不匹配
1.重新导入正确的固件配置文件和固件参数文件。
Possible 1. The system parameter waveform data is 2.导入正确的波形文件。
lost or damaged
1. Re-import the correct firmware configuration file and firmware parameter file.
Possible 2. The system waveform data does not 2. Import the correct waveform file.
match the current trolley board
    "