Error
code
Module
Type
Brief Description
13022 Error Software type 测纸失败Paper test failed
Error Description
Recommended measures
可能1.非检测区域是否超过打印区域
可能2.测纸传感器异常
Possible 1. Does the non-detection area exceed the
printing area?
Possible 2. The paper sensor is abnormal
1.请检查非检测区域是否超过打印区域
2.请检查测纸传感器是否正常
1. Please check whether the non-detection area exceeds the printing area
2. Please check whether the paper detection sensor is normal
13023 Error Software type 墨栈异常Ink stack abnormality
可能1.墨栈马达异常
可能2.墨栈限位异常
Possible 1. Abnormality of ink stack motor
Possible 2. Abnormality of ink stack limit
1.请检查墨栈马达及墨栈限位是否正常
1. Please check whether the ink stack motor and ink stack limit are normal.
13024 Error
打印初始化动作失败
Software type Print initialization action failed
可能1.固件配置和固件参数不正确或被破坏
可能2.主板和喷车板连接不正常
可能3.限位开关失效或者接线异常
可能4.马达或者伺服运动异常
可能5.小车运动速度过慢导致超时
1.请导入正确的固件配置和参数。
可能6.主板程序与喷车板逻辑不匹配
2.请检查错误描述里的接线。
Possible 1. The firmware configuration and
3.请检查马达或者伺服是否运动异常
firmware parameters are incorrect or damaged
4.请从软件版本Information里检查主板程序与喷车板逻辑版本是否匹配
Possible 2. The connection between the mainboard 1. Please import the correct firmware configuration and parameters.
and the trolley board is abnormal
2. Please check the wiring in the error description.
Possible 3. The limit switch is invalid or the wiring 3. Please check whether the motor or servo is moving abnormally
is abnormal
4. Please check whether the mainboard program and the trolley board logic version
Possible 4. The motor or servo movement is
match from the software version information
abnormal
Possible 5. The car moves too slowly and causes a
timeout
Possible 6. The mainboard program does not match
the trolley board logic
