Error
code
Module
11093 Error
Type
Brief Description
Parameters
获取校准图失败
Failed to obtain calibration chart
Error Description
Recommended measures
可能1.固件配置或固件参数不正确或破损坏
可能2.固件配置和固件参数不匹配
可能3.打印软件与主板程序版本不匹配
Possible 1. The firmware configuration or
firmware parameters are incorrect or damaged
Possible 2. The firmware configuration and
firmware parameters do not match
Possible 3. The printing software does not match
the mainboard program version
1.重新导入正确的固件配置文件和固件参数文件。
2.软件版本Information里查看软件和主板程序的前四位版本号是否相等。
1. Re-import the correct firmware configuration file and firmware parameter file.
2. Check whether the first four digits of the software and mainboard program version
numbers are equal in the software version information.
12000 Error
12001 Error
12002 Error
12003 Error
12004 Error
Hardware type
可能1.主板Flash芯片可能损坏
主板保存参数失败
可能2.主板Flash芯片存储空间不足
Possible 1. The mainboard Flash chip may be
1.请检查参数是否设置太大。
Mainboard failed to save parameters damaged
Please check whether the parameter is set too large.
Possible 2. The mainboard Flash chip storage space
is insufficient
设置主板输出信号(DO)失败
Hardware type Failed to set the mainboard output
signal (DO)
可能1.输出接口没有连接外部设备
Possible 1. The output interface is not connected to
1.检查伏电源接口接线是否松动。
2.检查输出接口是否连接外部设备。
an external device
1. Check if the V power interface wiring is loose.
2. Check if the output interface is connected to an external device.
Hardware type
打印失败，检测到缺纸
可能1.缺纸
Printing failed, out of paper detected Possible 1. Lack of paper
Hardware type 光栅异常Grating abnormal
可能1.光栅读值异常
Possible 1. Abnormal grating reading
Hardware type
打印过程中检测到处于缺纸状态
Paper shortage detected during
可能1.缺纸
printing
Possible 1. Lack of paper
1.请补充材料。
2.请检查缺纸传感器是否正常。
3.请检查缺纸传感器接线是否正确。
1. Please add materials.
2. Please check if the paper shortage sensor is normal.
3. Please check if the wiring of the paper shortage sensor is correct.
1.检查光栅接口接线是否异常。
1. Check whether the grating interface wiring is abnormal
1.请补充材料。
2.请检查缺纸传感器是否正常。
3.请检查缺纸传感器接线是否正确。
1. Please replenish the materials.
2. Please check whether the paper shortage sensor is normal.
3. Please check whether the paper shortage sensor wiring is correct.
    "