Error
code
Module
Type
Brief Description
设备断开
03004 Warning Warning Type Printer disconnection
Error Description
Recommended measures
可能1.设备断电
可能2.打印软件与设备未连接
可能3.电脑非千兆网卡或电脑网络驱动异常
(TCP通信)
可能4.电脑IP地址未设置正确(TCP通信)
可能5.电脑USB2.0/3.0驱动异常(USB通信)
Possible 1. The printer is powered off
Possible 2. The printing software is not connected
to the device
Possible 3. The computer does not have a Gigabit
network card or the computer network driver is
abnormal (TCP communication)
Possible 4. The computer IP address is not set
correctly (TCP communication)
Possible 5. The computer USB2.0/3.0 driver is
abnormal (USB communication)
1.检查电脑配置是否为千兆网卡(TCP通信)
2.检查电脑网络驱动是否正常(TCP通信)
3.检查电脑USB2.0/3.0驱动是否正常(USB通信)
1. Check if the computer is configured with a Gigabit network card (TCP
communication)
2. Check if the computer network driver is normal (TCP communication)
3. Check if the computer USB2.0/3.0 driver is normal (USB communication)
主板未初始化
03005 Warning Warning Type The mainboard is not initialized
可能1.主板未初始化
可能2.主板参数异常
Possible 1. The mainboard is not initialized
Possible 2. The mainboard parameters are
abnormal
1.主板未初始化，请与厂家联系
The mainboard is not initialized, please contact the manufacturer
系统初始化动作未完成
03006 Warning Warning Type System initialization is not
completed
可能1.系统初始化动作未完成
可能2.主板未正常运行
可能3.固件配置和固件参数不正确或被破坏
Possible 1. System initialization is not completed
Possible 2. The mainboard is not running normally
Possible 3. The firmware configuration and
firmware parameters are incorrect or damaged
1.确认主板是否正常运行
2.确认系统初始化动作是否正常
3.重新导入正确的固件配置文件和固件参数文件
1. Confirm whether the mainboard is running normally
2. Confirm whether the system initialization action is normal
3. Re-import the correct firmware configuration file and firmware parameter file
03007 Warning
Warning Type
还原出厂设置失败，出厂设置参
数为空
Restoring to factory settings failed,
factory settings parameters are
empty
可能1.未初始化出厂设置，导致无法还原出厂
设置
1.请重新导入固件配置和参数并保存出厂设置。
Possible 1. The factory settings were not
Please re-import the firmware configuration and parameters and save the factory
initialized, resulting in failure to restore the factory settings.
settings
    "