Error
code
Module
Type
Brief Description
10008
Error
Communication
喷车板初始化失败
Head board initialization failed
Error Description
Recommended measures
可能1.主板与喷车板 通讯异常
1.更换新的光纤线，连接测试。
可能2.固件配置与喷车板不兼容
2.更换光纤模块测试。
可能3.主板程序与喷车板单片机版本不匹配 3.请导入正确的固件配置。
Possible 1. Communication abnormality between 4.查看软件详细版本Information，检查主板与喷车板版本是否匹配。
the mainboard and the trolley board
1. Replace the new fiber optic cable and test the connection.
Possible 2. The firmware configuration is
2. Replace the fiber optic module and test.
incompatible with the trolley board
3. Please import the correct firmware configuration.
Possible 3. The mainboard program does not match 4. Check the detailed software version information and check whether the mainboard
the trolley board MCU version
and trolley board versions match.
10009
Error
Communication
设置波形参数失败
Failed to set waveform parameters
可能1.主板与喷车板光纤连接失败
可能2.主板或喷车板光纤模块异常
可能3.喷车板运行异常， 灯报错
可能4.固件配置与喷车板板卡不匹配
可能5.固件配置与喷车板逻辑版本不匹配
可能6.主板程序与喷车板逻辑版本不匹配
Possible 1. The optical fiber connection between
the mainboard and the trolley board failed
1.更换新的光纤线，连接测试。
2.更换光纤模块测试。
3.检查喷车板电源电压是否符合标准需求。
4.查看软件详细版本Information，检查主板与喷车板版本是否匹配。
5.重新导入正确的固件配置文件和固件参数文件。
Possible 2. The optical fiber module of the
1. Replace the new optical fiber cable and test the connection.
mainboard or the trolley board is abnormal
2. Replace the optical fiber module and test.
Possible 3. The trolley board is running
3. Check whether the power supply voltage of the trolley board meets the standard
abnormally, and the light reports an error
requirements.
Possible 4. The firmware configuration does not 4. Check the detailed software version information and check whether the mainboard
match the trolley board card
and trolley board versions match.
Possible 5. The firmware configuration does not 5. Re-import the correct firmware configuration file and firmware parameter file.
match the trolley board logic version
Possible 6. The mainboard program does not match
the trolley board logic version
10010
Error
主板与扩展板通信异常(接收串口
Communication
数据异常)
Abnormal communication between
the main board and the expansion
board (abnormal reception of serial
可能1.扩展板连接异常
Possible 1. Abnormal connection of expansion
board
port data)
1.检查扩展板接线是否正常。
2.检查硬件接口是否正常。
1. Check whether the expansion board wiring is normal.
2. Check whether the hardware interface is normal.
    "