Error
code
Module
Type
Brief Description
13025 Error
打印失败，暂停动作执行失败
Software type Printing failed, pause action
execution failed
Error Description
Recommended measures
可能1.固件配置和固件参数不正确或被破坏
可能2.主板和喷车板连接不正常
可能3.限位开关失效或者接线异常
可能4.马达或者伺服运动异常
可能5.小车运动速度过慢导致超时
1.请导入正确的固件配置和参数。
可能6.主板程序与喷车板逻辑不匹配
2.请检查错误描述里的接线。
Possible 1. The firmware configuration and
3.请检查马达或者伺服是否运动异常
firmware parameters are incorrect or damaged
4.请从软件版本Information里检查主板程序与喷车板逻辑版本是否匹配
Possible 2. The connection between the mainboard 1. Please import the correct firmware configuration and parameters.
and the trolley board is abnormal
2. Please check the wiring in the error description.
Possible 3. The limit switch is invalid or the wiring 3. Please check whether the motor or servo is moving abnormally
is abnormal
4. Please check whether the mainboard program and the trolley board logic version
Possible 4. The motor or servo movement is
match from the software version information
abnormal
Possible 5. The car moves too slowly and causes a
timeout
Possible 6. The mainboard program does not match
the trolley board logic
13026 Error
13027 Error
Software type
打印失败，系统状态出错
Printing failed, system status error
可能1.系统处于报错状态
Possible 1. The system is in an error state
打印失败，系统状态异常
Software type Printing failed, system status
abnormal
可能1.系统处于异常状态
Possible 1. The system is in an abnormal state
1.请重启机器和软件
1. Please restart the machine and software
1.请重启机器和软件
1. Please restart the machine and software
    "