Error
code
Module
Type
Brief Description
Error Description
12523 Error
清洗终点限位异常
Hardware type Abnormal cleaning end point limit
可能1.主板和限位连接线异常
可能2.限位传感器异常
可能3.限位输入信号与板卡信号绑定错误
Possible 1. The mainboard and limit connection
line are abnormal;
Possible 2. The limit sensor is abnormal;
Possible 3. The limit input signal is incorrectly
bound to the board signal
13000 Error
打开文件失败
Software type Failed to open file
可能1.文件不存在
可能2.文件被占用
Possible 1. The file does not exist
Possible 2. The file is occupied
13001 Error
Software type
文件格式标志错误，打开固件参
数或固件配置文件失败!
File format error, failed to open
firmware parameters or firmware
configuration file!
可能1.文件格式不正确
可能2.文件数据被破坏
Possible 1. The file format is incorrect
Possible 2. The file data is damaged
Recommended measures
1.主板和限位的线是否连接正常
2.限位传感器是否正常
3.导入正确的固件配置和参数文件
1. Check if the mainboard and limit wires are connected properly
2. Check if the limit sensor is normal
3. Check if the correct firmware configuration and parameter files are imported
1.确认文件是否存在
2.确认文件是否被打开
1. Confirm whether the file exists
2. Confirm whether the file is opened
1.请确认固件参数或固件配置文件版本是否正确
2.重新导入正确的固件参数文件或固件配置文件
1. Please confirm whether the firmware parameters or firmware configuration file
version is correct
2. Re-import the correct firmware parameter file or firmware configuration file
13002 Error
Software type
文件兼容号错误!，打开固件参数
或者固件配置文件失败!
File compatibility number error!
Failed to open firmware parameters
or firmware configuration file!
可能1.文件格式不正确
可能2.文件数据被破坏
Possible 1. The file format is incorrect
Possible 2. The file data is damaged
1.请确认固件参数或固件配置文件版本是否正确
2.重新导入正确的固件参数文件或固件配置文件
1. Please confirm whether the firmware parameters or firmware configuration file
version is correct
2. Re-import the correct firmware parameter file or firmware configuration file
13003 Error
Software type
文件版本号错误，打开固件参数
或者固件配置文件失败!
The file version number is wrong,
and opening the firmware
parameters or firmware
configuration file failed!
可能1.文件格式不正确
可能2.文件数据被破坏
Possible 1. The file format is incorrect
Possible 2. The file data is damaged
1.请确认固件参数或固件配置文件版本是否正确
2.重新导入正确的固件参数文件或固件配置文件
1. Please confirm whether the firmware parameters or firmware configuration file
version is correct
2. Re-import the correct firmware parameter file or firmware configuration file
    "