Error
code
Module
Type
Brief Description
13011 Error
Software type 解析Flash数据失败
Failed to parse Flash data
Error Description
Recommended measures
1.请重新导入正确的固件配置和参数文件
可能1.主板参数被破坏或者发生异常
2.软件版本Information里查看软件和主板程序的前四位版本号是否相等。
Possible 1: The mainboard parameters are damaged 1. Please re-import the correct firmware configuration and parameter files
or abnormal
2. Check the software version information to see if the first four digits of the software
and mainboard program version numbers are equal.
13012 Error
Software type
加载Flash失败,进入重置模式, 请
升级主板程序或者重置Flash
可能1.主板参数未初始化
Failed to load Flash, entered reset Possible 1. The mainboard parameters are not
mode, please upgrade the mainboard initialized
program or reset Flash
1.重置主板Flash参数
Reset mainboard Flash parameters
13013 Error
Software type
系统初始化动作执行失败
System initialization action failed
可能1.固件配置不正确或者被破坏
可能2.固件参数不正确或者被破坏
可能3.主板和喷车板连接不正常
可能4.限位开关失效或者接线异常
可能5.马达或者伺服运动异常
可能6.运动速度过慢导致超时
Possible 1. The firmware configuration is incorrect
or damaged.
1.请检查各主板间的连线是否正常
Possible 2. The firmware parameters are incorrect 2.请检查各主板上电是否正常
or damaged.
1. Please check whether the connection between each mainboard is normal
Possible 3. The connection between the mainboard 2. Please check whether the power supply of each mainboard is normal
and the trolley board is abnormal.
Possible 4. The limit switch fails or the wiring is
abnormal.
Possible 5. The motor or servo movement is
abnormal.
Possible 6. The movement speed is too slow and
causes a timeout.
13014 Error
波形刷新失败
Software type Waveform refresh failed
13015 Error
Software type
读取时钟失败!
Failed to read the clock!
可能1.导入的波形文件不正确
1.请导入正确的波形文件
Possible 1. The imported waveform file is incorrect Please import the correct waveform file
可能1.时钟芯片异常或者主板时间异常
Possible 1. The clock chip is abnormal or the
mainboard time is abnormal
1.请在售后模式校准时钟，看是否能校准，判断时钟芯片是否正常
Please calibrate the clock in after-sales mode to see if it can be calibrated and whether
the clock chip is normal.
    "