Error
code
Module
Type
Brief Description
13075 Error
该系统状态下不支持打印
Software type Printing is not supported in this
system state
Error Description
Recommended measures
可能1.系统处于保湿模式、调试模式或重置模
式
Possible 1. The system is in moisturizing mode,
debugging mode or reset mode
1.请在软件右下角状态栏检查系统是否处于这三个状态。
1. Please check whether the system is in these three states in the status bar in the lower
right corner of the software.
13076 Error
Software type
主板未初始化
Mainboard not initialized
可能1.主板未初始化
可能2.主板参数异常
Possible 1. The mainboard is not initialized
Possible 2. The mainboard parameters are
abnormal
1.主板未初始化，请与厂家联系
The mainboard is not initialized, please contact the manufacturer
13077 Error
Software type
边RIP边打接收出错，自动取消打
印!
Printing-while-RIP is in error,
printing is automatically canceled!
可能1.RIP软件异常
可能2.边RIP边打接收模块异常
Possible 1. RIP software is abnormal Possible 2.
The receiving module of printing-while-RIP is
abnormal
1.请重启RIP软件
Please restart the RIP software
13078 Error
升级主板程序失败
Software type Failed to upgrade the mainboard
program
可能1.升级文件不正确或被破坏
可能2.打印软件与主板程序版本不匹配
Possible 1. The upgrade file is incorrect or
damaged.
Possible 2. The printing software does not match
the mainboard program version.
1.确认升级文件是否正确。
2.软件版本Information里查看软件和主板程序的前四位版本号是否相等。
1. Confirm whether the upgrade file is correct.
2. Check whether the first four digits of the software and mainboard program version
numbers are equal in the software version information.
13079 Error
Software type
语言不匹配
Language mismatch
可能1.没有联机修改过语言
1.请联机修改语言使语言匹配
Possible 1. No language has been modified online Please modify the language online to make it match
15000 Error
相机没有升上到指定定位高度
Software type The camera has not risen to the
specified positioning height
可能1.相机没有升上到指定定位高度
Possible 1. The camera has not been raised to the
specified positioning height
1.检查固件配置和固件参数
Check the firmware configuration and firmware parameters
15001 Error
Software type AB模式未选定打印文件
AB mode no print file selected
可能1.AB模式未选定打印文件
Possible 1. No print file is selected in AB mode
1.请到PCB设置界面选定打印文件
Please go to the PCB settings interface to select the print file
    "