Error
code
Module
13016 Error
Type
Brief Description
Software type 设置时钟失败!
Failed to set clock!
13017 Error
配置分期功能异常
Software type Configuration staging function is
abnormal
13018 Error
组合操作被禁止执行!
Software type The combined operation is
prohibited!
Error Description
Recommended measures
可能1.时钟芯片异常或者主板时间异常
Possible 1. The clock chip is abnormal or the
mainboard time is abnormal
可能1.时钟芯片异常或者主板时间异常
Possible 1. The clock chip is abnormal or the
mainboard time is abnormal
1.请在售后模式校准时钟，看是否能校准，判断时钟芯片是否正常
Please calibrate the clock in after-sales mode to see if it can be calibrated and whether
the clock chip is normal.
1.请在售后模式校准时钟，看是否能校准，判断时钟芯片是否正常
Please calibrate the clock in after-sales mode to see if it can be calibrated and whether
the clock chip is normal.
可能1.其他动作正在执行
可能2.当前系统状态下，此动作被禁止执行
Possible 1. Other actions are being executed.
Possible 2. This action is prohibited in the current
system state.
1.需要等待其他动作命令执行完毕
2.检查系统状态是否处于正常状态
1. Need to wait for other action commands to be executed
2. Check whether the system status is normal
13019 Error
Software type
基础操作被禁止执行!
Basic operations are prohibited!
可能1.其他动作正在执行
可能2.当前系统状态下，此动作被禁止执行
Possible 1. Other actions are being executed.
Possible 2. This action is prohibited in the current
system state.
1.需要等待其他动作命令执行完毕
2.检查系统状态是否处于正常状态
1. Need to wait for other action commands to be executed
2. Check whether the system status is normal
13020 Error
测高失败
Software type Height measurement failed
可能1.测高微动开关失效，未检测到微动开关
信号
可能2.Z轴马达或驱动器失效
可能3.Z轴运动速度过慢，导致运动超时
1.检查测高微动开关是否失效
2.检查Z马达或驱动器是否失效
Possible 1. The height measurement micro switch
failed and the micro switch signal was not detected.
Possible 2. The Z-axis motor or driver failed.
1.
2.
Check
Check
if
if
the
the
height measuring
Z motor or driver
micro switch
is faulty
is
faulty
Possible 3. The Z-axis movement speed was too
slow, resulting in movement timeout.
13021 Error
Software type 校准X齿轮比失败
Failed to calibrate X gear ratio
可能1.X轴马达或驱动器失效.
可能2.X轴运动速度过慢，导致运动超时
Possible 1. X-axis motor or driver failure.
Possible 2. X-axis movement speed is too slow,
resulting in movement timeout
1.检查X马达或驱动器是否失效
1. Check if the X motor or driver fails
    "