Operation Manual of WEICHAI GENSET
down the machine with load. Generally,
after unloading, the set needs to run at
no load for 3~5 min before shutdown.
Caution! When connecting or removing
the load cable, you must shut down the
set and remove the negative connection
of the battery.
At this time, if the emergency stop
button is pressed, the set will quickly cut
off the load and immediately turn off the
throttle, and the red "emergency stop"
indicator is on. To release the emergency
stop signal, the button needs to be
pressed again and to pop up.
Emergency shutdown
Press the emergency stop button for
emergency shutdown.
When fire, electricity leakage or other
natural disasters that may endanger the
safety of set and operators occur.
When the set is running normally or
supplying power to the equipment, the
user is advised not to perform
emergency shutdown at will under non-
emergency conditions.
22
    "