hoursetting Minute Use current computer clocks minute (Page 52 / 154) LabelMark EZCAD V2 Software Manual

EzCad2UNI User’s Manual

12-hour-setting

Minute: Use current computer clock's minute for the corresponding text.

Second: Use current computer clock's second for the corresponding text.

Time Section: Divides into 24 time sections one day of 24 hour, the user may define each

time section is a text. This function mainly uses in the work piece the processing needing to have

the number of runs information.

TCP/IP communication

When the operation is taking place, the system will pick up the text from the network.

Notice: The network interface in here is the network interface uses in TCP/IP agreement.

When the user selected the “TCP/IP communication”, the parameter defines will display

automatically in the dialog box, see the figure 4-41:

Figure 4-41 TCP/IP communication parameter definition

IP Address: select the IP address which from reads the data

Port: select the port the TCP/IP communication used

Command: When the system processes to this text object, the system through the

network interface to transmit this order character string to a computer assigned the IP address,

request the computer sends the character string needs to process at present, the system will not

return until the computer replied, after the response of the computer, the system will process the

returns text automatically.

Unicode: After choosing this option, the system to the computer transmission which and

the read character is the Unicode form, otherwise is the ASCII form.

The following example showed how to use this function:

Now has a customer to process 10000 work pieces, on the work piece the marking content is

a text, but each work piece must process the text content is dissimilar, therefore, before each work

piece processing, must real-time read the processing content through the network from the local

area network a computer server (IP: 192.168.0.1 port is 1000) on.

1． Open ezcad2 to establish a text object, adjust the text size, the position and the

processing parameter.

2． Choice the text object, select the “enables variable text”, click the “increase” button, the

system will spring a Figure dialog box as 4-32, select TCP/IP communication, set the

network interface parameter, the IP address parameter fills in server computer's IP, here

is 192.168.0.1; the port parameter sets to use in the communication the port number, here

is 1000, the network interface parameter must identically with the server computer on ,

otherwise it will cause to be unable communication.

3． Set the command is TCP: Give me string.(This command may for the random server