Parameter Name
XC3000S Series Laser Cutting
System Commissioning Manual
Parallel exchange
Default Value Remarks
Pallet changer with bolt
No
Bolt unclamped in-pos
No
Bolt clamped in-pos
None
Up-bolt unclamped in-pos logic Not used,
NC
Up-bolt clamped in-pos logic
Not used,
NC
Low-bolt unclamped in-pos logic Not used,
NC
Low-bolt clamped in-pos logic
Up-pallet bolt unclamped
Not used,
NC
Not used
Up-pallet bolt clamped
Not used
Low--pallet bolt unclamped
Not used
Fill in according to the actual configuration
Fill in according to the actual configuration,
Settable delay time
Fill in according to the actual configuration
Settable up-bolt unclamped in-pos input pin
Up-bolt unclamped in-pos sensor logic.
If this signal is available, just select it according to
the actual configuration;
If this signal is not available, select NO.
Settable up-bolt clamped in-pos input pin
Up-bolt clamped in-pos sensor logic.
Settable low-bolt unclamped in-pos input pin
Low-bolt unclamped in-pos sensor logic.
Settable low -bolt clamped in-pos input pin
Low-bolt clamped in-pos sensor logic.
Settable up-pallet bolt unclamped output pin
Settable up-pallet bolt clamped output pin
Settable low-pallet bolt unclamped output pin
Low--pallet bolt clamped
Not used
Settable low-pallet bolt clamped output pin
Z-axis up-pallet negative
0
soft limit
When the up-pallet is in the cutting area, the
Z-axis moves to this coordinate at the lowest
92
