150W Power Supply Model: HY-T150
Output
Efficiency
MeanTime Between
Failure (MTBF)
Maximum Input
Voltage
Maximum Output
Current
≥90﹪（full load）
≥10000H
DC 50KV
DC 38MA
Response Speed
Control Interface
Withstand Voltage
Protection
Environment
Cooling Way
Dimension
Color
≤1ms（from the switch Signal is given to the output current up to 90% of the setting
current）
TTL level switch control; high or low effective level can be chosen (details refer to
the control terminal specification)
Input-Output, Input-Shell: AC1500V 10MA 60S; Output negative is connected with
machine shell.
can work in open-circuit condition for a short time（Require a good protective
earthing and avoid arc between the positive and the machine shell）
Operating Temperature：-10~40℃），Relative Humidity (RH)≤90﹪
Force-Air Cooling (FAC)
L×W×H=325*240*97(mm)(normal type)
Black
III.Operation Instruction:
1)Laser Tube connection: (Referring to Power supply and laser device's connection diagram- figure
1)High voltage terminal (HV+) of HY-T150 power supply should be connected to the positive pole of CO2
laser device. Current circuit of the power supply shall be connected to negative pole (laser output terminal)
of laser device, through an ampere meter or directly.
2)Connection of control signal
The control signal shall be reliably connected to control terminal of the power supply HY-T150, after
connecting the DAC output signal and TTL signal of external computer with the power supply, the laser
device shall work as expected. If the laser lamp can not work properly, should check the control signal is
correct or not(include check the voltage specification and logic),if use PWM control as power control,make
sure f≥20KHz,Amplitude (peak value) ≤5V,Check and make sure protection switch WP connection is
correct at same time.
3)Voltage of power input:
HY-T150 's power input of the power supply shall be 220VAC/50Hz. If 110VAC is needed, please specify
when placing order.
4)Others:
A group of protection switches are also reserved for detection of water switch, fan switch,
open-enclosure protection and so on.
Caution:
    "