⑤空压机选型问题
⑥机头问题，螺杆间隙增大，或者轴承损坏
解决办法
①运行时拿下空滤检查进气口是否打开，如正常打开检查后面是否有漏气
②出现打气缓慢，尝试拿下空滤滤芯，看是否正常打压
③出现进气口不开，检查电磁阀电压，检查保险
④调节进气阀泄压螺丝，看是否因气缸憋气导致进气阀不开
4, fault phenomenon: low pressure unit
1.The intake valve is faulty, resulting in the failure of normal air intake
2.Air filter dirty, resulting in air intake is not smooth
3. Pipe valve problems, leakage or valve is not closed to lead to abnormal pressure
4. There are suction drying machines, or other scheduled units
5.The type selection problem of air compressor
6. The head problem, screw clearance increase, or bearing damage
The solution
1.When running, take down the air filter to check whether the air inlet is open, such as normal open check
whether there is air leakage behind
2. When air pumping is slow, try to take down the air filter element to see if it is normal to suppress
3. If the air inlet does not open, check the voltage of the solenoid valve and check the insurance
4.Adjust the pressure relief screw of the inlet valve to see whether the inlet valve does not open because of
cylinder suffocation
-3-
