The finished
Please check whether the chain wheel and the long axis
are clamped tightly at the end of the finished product
collecting core axle.
Please change the chain wheel and the
long axis.
product
8 collecting core Please check whether the tightening force at the end of
axle shakes. the finished product collecting core axle is too strong or Please adjust the tightening force.
too weak.
6. Precaution
(1) Please carefully read this manual before installation and operation of this equipment.
(2) Please take care when opening the cover plate of the machine case. When screwing off the last two screws, please hold
or support the cover plate to prevent it from suddenly falling down.
(3) The quartz pipe is fragile, and it should be gently taken and placed during installation and placement.
(4) Please do not connect power supply when installing the quartz pipe. Please remember to fix the cover plate of the
machine case after the installation of the quartz pipe, and keep the human body away from electronic components in the
machine case to ensure the safety of people.
(5) The left and right supports of the picture placing core axle should be tightly and trimly installed.
(6) Please do not place hands between rubber rollers while laminating to prevent clamping hands.
(7) It is strictly prohibited to place sharps (such as blades) on the operation platform.
(8) It is strictly prohibited to use sharps (such as blades) to touch or scrape the surface of the rubber roller, which will
influence the flatness of the rubber roller and the effect of laminating.
(9) Please place soft films between the upper and lower rubber rollers after laminating to extend the service life of them.
(10) The surface of rubber rollers should be kept clean. Please use duster cloth dipping in alcohol to clean the surface of the
rubber roller and confirm that there is no stain or foreign matter on the surface.
(11) The power socket shall have proper grounding protection.
(12) The actual condition of the equipment shall prevail in case of divergences between the actual functions and the content
in this manual, which is caused by equipment upgrade and other factors.
10
    "