Sending the file to “Production Manager”.
Once the file is prepared, select the “RIP & Print” option (See Figure 2)
There are a few things to check at this stage:
1. The “Ignore Overprint” option Must be unchecked, or the White/Varnish will not print
2. If your driver has a “ColorMode” for White/Varnish, this must be selected
3. Make sure to check the “Use Printer SpotColors”
Figure 2
Once this is complete, select the “mapping” option under the “use Printer SpotColors” section to
bring up the mapping interface. Here, check that the “Underbase” is mapped to the White channel,
    "