10. Application Functions
2. Regeneration brake resistor setting (0x2009)
- Select the built-in regeneration brake (0x2009 = 0)
- Attach to the backside of the heat protection panel
- Default value: 0
3. Check the internalregeneration brake value and power
- Check internalregeneration brake value (0x200B)
- Check regeneration brakepower (0x200C)
- 1KW or less : Attach to the backside of the heat protection panel(See the figure
below)
- 3.5KW ~ 15KW : install inside the drive
- 15KW or above: no internalregeneration brake
Internal regeneration brake resistor
attached to the backside of the drive,
1kW or below
10-40
    "