platform height on the processing, can make can write up function.
Here the corresponding is platform write position in which high on the processing, carried the
corresponding is empty pen position before go, platform should be moved to which level in the
optical translation will not again to interfere with the process workpiece. If confirmed the optical
not and the translation of the process workpiece to interfere, don't need to set up the pen position.
Use way is:
1> Can write pen to carry.
2>Make can write position, manual control panel key mobile platform, to stay processing
graphics graphics processing plane, adjust the focal length. Then click button "read", and then
write all set up position.
3>That can carry a position, manual control panel key mobile platform, move to the optical
will not interfere with the work of the height, and through the panel key move the optical,
confirmed that won't interfere, some button "read", and then set up a position.
【point】
Here the rabis, and is suitable for drawing tool create a point figure yuan, or from DXF file
into the spot diagram yuan. And the current layer processing methods has nothing to do, namely
whether the current layer is cutting or a scan, graphics in the spot diagram yuan has always been
to the rbi way output.
The rbi movement speed for layer speed, beating the energy for the maximum energy layer
laser.
【The laser Enable】
When the machine is equipped with two road laser, usually, are two road and output.
But the user may through the set that laser, that its not output all the way.
【The joint IO output 】
All the way and the layer associated IO output, obligate function.
4.10.3 Laser scanning parameters Settings
