4.9 Output Setting
4.9.1 Rotating sculpture
【Enable rotate engrave】：After enable engraving，the actual precision of Y-axis will be based on
diameter and step per rotate to auto match the setting of pulse precision of Y-axis. In addition, the
work area in the main interface will also change.
【Diameter】：The diameter size of the parts.
【Step per rotate】：The number of pulse corresponds to the workpiece rotate one week.
【 speed 】 : test the speed of work.
The function is to facilitate the users to replace parts, and different size of the workpiece
when the workpiece is not very different before use. When the relatively large difference in size of
the workpiece, it is recommended to use directly modify the motor step approach to
implementation.
Rotary engraving is only when using the rotation axis to replace the Y-axis use.
4.9.2 Feed Setting
To use the feed, must first enable the feed.
After set feeding parameters，the shaft will be feeding a feeding length, and repeat the process ,
until the times of processing reach to number of feeding.
If the machine is not equipped with feeding devices, in general, enable the feed ban.
