63 F166 Count Down Value Attained Setting F1 63 Parameter (Page 58 / 83) Fuling DZB100 Inverter User Manual

DZB100 Series

Parameter Settings

F1-63 F1-66 Count Down Value Attained Setting

F1-

Parameter Name Pre-set count down value attained

Factory Setting 5

Unit 1

Settings 1 9999

When the internal counter, triggered by the external input TRG, counts down and reaches

this specified value, the specified output terminal (MO1) will be closed (assuming that

F1-45 is set to 0003). The output terminal (MO1) will be opened when the internal counter

reaches the value specified in F1-66. (See chart below)

F1-

Parameter Name Count Down Value Setting

Factory Setting 10

Unit 1

Settings 1 9999

This parameter determines the value of the internal counter. The internal counter may be

triggered by an external signal via the external input TRG terminal.

Upon completion of the countdown, the specified output terminal (MO2) will be closed

(assuming that F1-46 is set to 0003). (See chart below)

The timing chart is illustrated as follows:

F1-45 =0003

F1-46 =0003

F1-63 =0005

F1-66 =0010

Application example:

Control

c10 c09 c08 c07 c06 c05 c04 c03 c02 c01

terminaL TRG

Control

terminaL M01

Control

terminaL M02

Note: The minimum On time for T2 is 2 msec or more.

The minimum cycle time for T1 is 6 msec. or more.

c10 c09 c08

-56-