DZB100 Series
Introduction
Chapter 1 Introduction
The purpose of this chapter is to provide specific, yet simple information to unpack, install the
AC drive. This chapter contains information on the following:
1.1 Receiving, Transportation, and Storage
1.2 Nameplate Information
1.1 Receiving, Storage and Transportation
The AC motor drive has gone through rigorous quality control tests at the factory before shipment.
After receiving the AC drive, check for the following.
Receiving
1.Check to make sure that the package includes an AC drive,the User Manual,dust covers and
rubber bushings.
2.Inspect the unit to insure it was not damaged during shipment.
3.Make sure that the part number indicated on the nameplate corresponds with the part number
of your order.
Storage
The AC Drive should be kept in the shipping carton before installation. In order to retain the
warranty coverage, the AC drive should be stored properly when it is not to be used for an
extended period of time. Some storage suggestions are:
1.Store in a clean, dry location.
2.Store within an ambient temperature range of -20 C to +65 C.
3.If possible, store in an air-conditioned environment where the relative humidity is less than
95%, non-condensing.
4.Do not store the AC drive in places where it could be exposed to corrosive gases.
5.Do not store the AC drive on a shelf or on an unstable surface.
Transportation
Temperature: -25 C to +70 C; R.H.: 0% to 95%;
Air Pressure: 70kPa to 106kPa.
-2-
