12 Parameter Name Acceleration time 2 Factory Setting (Page 36 / 83) Fuling DZB100 Inverter User Manual

DZB100 Series

Parameter Settings

F1-

Parameter Name Acceleration time 2

Factory Setting 10.0sec

Unit 0.1sec

Settings 0.1 999.9sec

This parameter can be programmed while the drive is running.

This parameter determines the time required for the AC drive to ramp from 0 Hz to the

Maximum operating frequency (F1-03). The rate is linear unless S Curve is "Enabled."

Acceleration time 1 is the default. A Multi-Function Input Terminal can be programmed to

select Acceleration time 1 or Acceleration time 2. See parameters F1-39, 40, 41and 42.

F1-

Parameter Name Deceleration time 1

Factory Setting 10.0sec

Unit 0.1sec

Settings 0.1 999.9sec

This parameter can be programmed while the drive is running.

This parameter determines the time for the AC drive to decelerate from the Maximum

operating frequency (F1-03) down to 0 Hz. The rate is linear unless S Curve is "Enabled."

Deceleration time 1 is the default. A Multi-Function Input Terminal can be programmed to

select Deceleration time 1 or Deceleration time 2.See parameters F1-39, 40,41 and 42.

F1-14 Jog Accel / Decel Time

F1-

Parameter Name Jog Accel / Decel time select

Factory Setting 10.0sec

Unit 0.1sec

Settings 0.1 600.0sec

This parameter can be programmed while the drive is running.

This parameter determines the time required for the AC Drive to ramp from 0 Hz to the Jog

frequency and the time required to ramp from the Jog frequency to 0 Hz.

-34-